October 26th, 2011
The main function is to convert electrical power supply of alternating current is available from the flow of electricity into direct electric current required by the components on the computer. Best power supply can produce a clean output; the output voltage is maintained constant with the level of tolerance of input voltage, load power, is also working temperature, with conversion rates efficiency of 100%.
Power supply for the computer needs a big power, with minimal levels of heat and voltage are more awake. Linear power supply is not suitable for this. Then you should use the method of switching power supply. Much more complex, but the best power supply offers a level of efficiency and greater power. The major advantage in the ability is to control the output voltage to stay awake. Pulse Width Modulation is a major signal that gives the command, to control the voltage, if there is a change in the output load. It can work in a short time interval, in just a matter of microseconds.
If you buy a power supply, it is clear that we observe is the number of watts it. Actually there are things more important than just a big watts, which is Rails or channel power delivery. To note the best power supply specifications are:
* Voltage = v
* Ampere = A
* Watt = W (v * A)
Where the label is written on each of the PSU casing rails of the most widely used is +3.3 v, +5 v, +12 v and the current through it.
* +3.3 V rail * 30A = 100W
* +5 V rails * 30A = 150W
* +12 V rails * 15A = 180W
* Total = 430 watts (the overall power PSU)
You better invest the best power supply despite the tiny fraction of the price of more expensive, but the stability and durability of components is more awake. If your PC system is the mainstream category, with at least 400 VGA SLI then pure power is a minimum requirement, raol +12 v is above 18A or 26A combined.
Posted in 
Tags: